I did a power run on a dynapack yesterday, as I've never dyno'ed this car before. Here are the results:
http://s9.postimg.org/kevmjohnz/2014...527_Page_1.jpg
This chart overlays a run taken from stock BRZ which was done on the same dyno:
http://s9.postimg.org/g70uaxg8f/2014...527_Page_2.jpg
My tune was done by @
jamesm from HRI Tuning. Only other mod is a Motiv catted front pipe. I felt that I really needed a custom tune instead of a canned tune because the of the crappy fuel here...even on 98RON...and the ECU's hyper-sensitivity to fuel quality.
Anyways, what I noticed was that the AFR readings from the dyno run doesn't quite match the readings taken from my OFT logs. Can someone chime as to why? Here's my most recent data log taken couple of days ago:
http://datazap.me/u/fizz/hrilog11?lo...1&zoom=33-2077
The AFR's from the dyno appears to be quite lean at WOT...?