Quote:
Originally Posted by Netrunner
|
Yeah look pretty good, shiv tune always run on the rick side higher rpm your high 11's so that pretty standard for oft tunes
there is a very small amount of knock about 6400-6500 and a bit about 6700 rpm see the chompy bits out of the kc learned curve. The FLKC logging is still not working but you can work it out from kc learned. Looks like is only about -0.7 degrees so it probably ok and the fine learning knock control will probably sort that after a bit more time if it keeps happening.
http://datazap.me/u/netrunner/third?...zoom=1269-1383
Did a thread on knock control here
http://www.ft86club.com/forums/showt...ock+australian