Quote:
Originally Posted by Fizz
Good stuff...thanks Steve. What about doing that pedal thing after flashing but just before starting up the engine? Is there a way to totally eliminate it?
In my (limited) experience, each time after flashing I would turn the key "OFF", then "ON" again, wait 10 secs, then depress throttle pedal approx 10-15, start the engine, leave idle for 2 mins, then drive off. Even so, there's a very slight "dead" travel around maybe 3mm or so at the top of the pedal travel. But this will eventually go away after a couple of weeks.
|
Without looking at the code in ecu, were only ever just guessing and going from experience
, What your doing is probably about the best you will get its just speeding up learning process not completely eliminating it.