Quote:
Originally Posted by JimmyMac
Yeah, I would try the stock tune and eliminate that possible cause. Also be sure your vacuum hose is zip tied down at the back of the intake. The hose is too short once the BPB is/are installed and needs to be checked. An air leak will cause idle problems. This happened to me when I first installed my BPB. Zip tied both ends and no issues since.
|
I did zip tie the top vac hose and i know that its good and tight but im a dumb ass and didnt think about zipping down the bottom part of the vac line. i will do that tonight. its not really an idle issue, the does idle fine 99% if the time. just random stalls when not fully warm coming to a stop... but ill zip my lower hose tonight.