Quote:
Originally Posted by D-VO
I don't have any issues logging. I want to log IDC. The A01C doesn't have IDC. I tried using what was written on page 1:
type = calc
paramname = IDC
scalingrpn = RPM,IPW,*,0.0008333333,*
This particular param doesn't log correctly.
|
those are just examples, and for wrx ecu from memory so not sure if scaling would be correct
as long as RPM and IPW are defined prior to that it should work
if the ram address is not in the list on that page then you only hope is to talk to @
Td-d