|
Well, I took a swing at fixing this myself, we'll see how well it works.
The problem area is very easy to get to; pry off the two fake carbon fiber portions on your dash, unbolt the upper vent, and then pry it out (gently).
The issue is that the the dash isn't lifting because its multiple layers are separating; rather, it's just not tied down/clipped to anything other than in the direct center so when it gets hot, it expands and pulls up since it cant go out. I put a few thin pieces of double sided tape between that portion of the dash and the back of the vent; we'll see how well it holds.
|