View Single Post
Old 06-09-2014, 03:02 PM   #10
zdr93523
Senior Member
 
zdr93523's Avatar
 
Join Date: Apr 2013
Drives: 2013 BRZ Limited
Location: Utah
Posts: 631
Thanks: 447
Thanked 350 Times in 168 Posts
Mentioned: 5 Post(s)
Garage
Quote:
Originally Posted by Khyron686 View Post
Please post some pics - even cellphone! Also I assume you're on the stock 7 inch wide wheels?

I'm looking at the same tires but in 245/40 on an 8 inch wheel.

I run 245/40R17 PS A/S 3's on a 17x9 on the street. Had 225s on a 17x8. Do you want pics of the 245s?

@kaybee123 for the handling question... @was385 is right. If you're open to mods: Springs first, and then alignment, then sways. I run RCE Yellows with an aggressive alignment (HVT top hats, front camber bolts, and rear LCAs) and Eibach Sways front and rear set to soft. The car is beautifully balanced with this setup.

If you don't want to do mods to the car, install some SPC camber bolts and get it aligned with the camber bolts maxed out and zero toe all around. It will make a world of difference.
__________________
Instagram: @zdr_93523
Youtube: https://www.youtube.com/user/zdr93523
Pink Ribbon Racing 2013 BRZ Limited NASA ST2 and TT2 race car
www.makesmodels.com
www.camautomag.com
zdr93523 is offline   Reply With Quote
The Following User Says Thank You to zdr93523 For This Useful Post:
was385 (06-09-2014)