Quote:
Originally Posted by Vic
does your wheels have hub rings? usually hub rings prevent the shaking and wobbling.
|
Did you read the thread? Hubcentricity is fine, the spacer's lug nuts are too thick and are hitting the backside of the wheel, preventing it from sitting flush.
I had the same issue with front 20mm spacers, about 3/16 wobble side to side. I ended up shaving my lug nuts down a couple mm with a Dremel and a fiber cutoff wheel, Checked them each with a caliper, and rounded the outer corners slightly. It took some time but worked great. My snow wheels are steelies, and the steel is stamped into shape. They have a relief stamped into them between the holes, but the edges of the relief are rounded (not machined) and hit the lugnuts. The rear is a 25mm, and the lug nuts are just below the surface so no prob there.