Quote:
Originally Posted by aznatama
If your'e sure your crossover is accepting high-level input and outputting low level RCA, then maybe it's a mismatch between your xover output and your amp input? Double check to make sure your amp can accept the voltage coming form your xover.
AFAIK, there's no "protection mode" in these radios.
|
I'm sorry that was a typo, I'm using the
low level output that the factory amp uses, feeding it into my crossover, then back to the amp (to eliminate bass from door speakers). If the crossovers pre-out voltage is too high for the factory amp, why would it make the entire head unit cut out? Wouldn't that just put the amp into protection mode?