Quote:
Originally Posted by Racecomp Engineering
The brembos get you a much bigger heat sink, but more of a shift in bias.
- Andy
|
Switching to brembos is going from a 295mm disc to a 326mm disc, plus adding 6mm more width to the rotor and god knows what to the piston area. I wasn't able to access Fizz's spreadsheet.
Just switching to the 326mm disc should multiply the applied torque by 1.1 because of the extra distance from the point of rotation to the point of applied pressure. I wonder if our calipers would fit over a 30mm wide rotor?