|
OK so here's the picture of it installed! Using garax 6000k for HID, LED white/amber switchbacks for turn signals and the LED H11 HP8 cool white from diode dynamics for the fogs.
Installation was easy and I used the diagram below to figure out what wire to tap. I tapped pin 5 for trigger and pin 8 for ground since pin 6 is hard to reach get the tap piece around it because I didn't wanna cut more of the tape that covers everything.
Other than that, I zip tied everything nice and neat, ran the left fog under the intake and zip tied it to some other cables I saw and got working!
|