Quote:
Originally Posted by 1Cor10:23
Question about the dabs of permatex...should they be squarely on the mating surface or slightly toward the center (slightly overhanging such that some of it, when mated, will go into the inside?). I find in @ Dezoris video, his was squarely on the mating surface, pretty tidy and on @ FT-86 SpeedFactory's video it was more toward the inside (particularly top dap). Planning on installing tomorrow afternoon  Thanks!
Edit: I guess ultimately, is there such a thing as too much permatex in this situation? I typically go a bit more in these type of situations.. @ Raceseng would love your opinion on this! |
You will see on the mating surface there is seam at the top and bottom thats what you are putting the permatex on. Follow the instructions from raceeng and let cure overnight with car cooled off and you should be golden.