Quote:
Originally Posted by xxscaxx
They sent me a big bag of them...i'd call Innovate. They should send you some without any issue. None of my bolts broke when putting them in/out, two broke after the fact like a week later.
Where people are catching the oil (judging by this thread) on our kit is on the crankcase side, which is the middle port on the back of the charger. for my Radium can I have the top port going into the stock crankcase line (that was originally plugged into the middle port of the sc) and the bottom port going directly to the back of the crankcase port on the supercharger (middle port).
http://www.ft86club.com/forums/showp...postcount=3258 |
I ended up sourcing them locally - I would like the car back up and running soon so buying a replacement set isn't a huge problem. I didn't have any on the plate snap on the way out - one head sheared off of the back when taking that off, similar to a few posts ago. I'm just being proactive to replace them all - I fear the heat cycle made them brittle over the last few months.
Sent from my Nexus 5 using Tapatalk