Quote:
Originally Posted by mikalem
No set of hardware in the upgrade kit - which line did you put the catch can in place with? Thinking that's going to be next but I'm a little confused of the three ports from the engine (crank breather, evap selonoid, engine breather on the intake tube) the can should run between.
Sent from my Nexus 5 using Tapatalk
|
They sent me a big bag of them...i'd call Innovate. They should send you some without any issue. None of my bolts broke when putting them in/out, two broke after the fact like a week later.
Where people are catching the oil (judging by this thread) on our kit is on the crankcase side, which is the middle port on the back of the charger. for my Radium can I have the top port going into the stock crankcase line (that was originally plugged into the middle port of the sc) and the bottom port going directly to the back of the crankcase port on the supercharger (middle port).
http://www.ft86club.com/forums/showp...postcount=3258