Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - glamcem's Rotrex Supercharged (Krafwerks) _PART OUT

glamcem · 05-17-2014, 10:58 PM

my custom brake ducting didn't work most likely due to bigger size of the hose

I will have to find a better way to feed more air into the inner fender well, see below pictures

Carbotech XP-12s and Centric Premium blank rotors have been installed as well, thanks to @CSG Mike for good communication

Look how thicker they are when put against to Stoptech pads

heat reflective tapes (2000F) on the calipers

my ghetto ducting and spindle :P

do yourself a favor and make sure you completely removed your ABS sensor before even removing the hubs

and of course I have no ABS and traction control at the moment

05-17-2014, 10:58 PM	#24
glamcem Senior Member Join Date: Oct 2013 Drives: 2022 BRZ Limited Location: Orange County Posts: 1,553 Thanks: 997 Thanked 607 Times in 404 Posts Mentioned: 32 Post(s) Tagged: 1 Thread(s)	my custom brake ducting didn't work most likely due to bigger size of the hose I will have to find a better way to feed more air into the inner fender well, see below pictures Carbotech XP-12s and Centric Premium blank rotors have been installed as well, thanks to @CSG Mike for good communication Look how thicker they are when put against to Stoptech pads heat reflective tapes (2000F) on the calipers my ghetto ducting and spindle :P do yourself a favor and make sure you completely removed your ABS sensor before even removing the hubs and of course I have no ABS and traction control at the moment __________________ 2022 BRZ Track Build (A New Chapter) Last edited by glamcem; 06-03-2014 at 01:18 PM.