Accelerator pedal adjustment. Wanted to have an easier time doing heel and toe without having to get stupid "over pedals" so my fix was this. Took off the electronic accel assembly off its seat, two 10mm bolts. Removed it and before putting it back on, I placed a 10mm bolt on each stud, then a washer on top of that so it sits flat and doesn't wobble. Probably raised the pedal 5 or 6mm. I was worried about the pedal not reaching the stop on the floor but it reaches! My gas pedal is able to move 5-6mm more than factory. Don't know if this will cause any problems so I'll be the test y. Will update this.
Sent from my iPhone using Tapatalk