|
1) Installation = 15 minutes, no problems at all. All of the cowl plastics and rubber headlight seals from the factory hood can be used if you drill the required holes (not needed but I did it anyway for completeness). Fit was flawless, no gaps at all and it sits flush with the fenders.
2)No, the VIS hood is actually more structurally sound than the stock hood at high speeds. As in there is no noticeable lift like there is with the stock hood. This is partly due to the fact the AMS is venting the underhood psi.
3)Yes, search VIS AMS and there is a thread where I put a bunch of pics in it. If there is something specific you are looking for let me know.
__________________
LSx Powered 86/ASE Master Certified Automotive Technician
|