[SPCorBUST]

Originally Posted by KraftWerks

I'm going to try to answer as many questions as possible. If you are in an emergency situation, call us rather than posting. A lot of questions have been asked over the weekend, some of them fairly urgent. I've expressed that we are closed for business on the weekends and that responses on the forum may not be as quick because we are out of the office... So things like "waiting for Kraftwerks response" or "I need this right now @KraftWerks." are literally being seen right now, and we're moving as fast as possible to get everyone squared away.



@zoth, was your kit purchased direct from Kraftwerks or from a dealer? Kit's that are currently shipping from us DO come with toothed pulley, however if your kit was stocked at a dealer, it may not have them in the box because it has been on the dealers shelf for a few weeks. We are providing them for free, if you need them just ask!

MAP sensors- The ONLY kit that comes with a MAP is the C30-94 kit that is purchased with tuning. If you don't have a MAP sensor in your kit that was purchased from us with tuning, please call us!

Instructions- We ARE updating the instructions, they will be available as soon as possible.

@KraftWerks Is there another molded couple for C38 kits? The sc outlet side / molded coupler inlet side is apparently too small. The other (larger) side fits over the outlet perfectly, and the outlet is the same size as the hotside pipe, so I can't see why it would be made smaller...? That would bottleneck right at the very beginning, needless to say it's (as far as I've tried) extremely difficult or nigh impossible to get the smaller side over the sc outlet.

Sent from my SGH-M919 using Tapatalk