Quote:
Originally Posted by LFA.Baby
Just did it and I am not sure if the bolt behind the U shape bracket is tight enough. I did use the 12mm wrench to tightening it, but it slipped on the bolt.. I don't think I mess up the bolt, so I used my fingers to turn it tight, if it doesn't turn no more (with fingers force) I guess it is tight enough.  |
Should check it once a while to make sure it does not start loosening on you
And to make the 12mm tightening much easier, you need to use a very short wrench (like less than 5 inches) to make sure it's grabbing correctly because there is not much room for positioning back there