Correct. Here ya go!
Code:
type = obd
protocolid = 6 ; ISO15765
mode23txaddrwidth = 4 ; mode23 req format info
mode23txlenwidth = 1 ; mode23 req format info
mode23rxaddrwidth = 0 ; mode23 req format info
mode23uds = 1 ; lets OBD channels know you are using mode23 UDS
sortpids = 1 ; sort these PIDs by value to potentially make for fewer requests (=faster)
calcsampinterval = 1000 ; timing parameter - leave as is - will make default for release version
paramname = MAF_Voltage
paramid = 0xFFF842AC
databits = 16
scalingrpn = x,0.000076293945,*
paramname = MAF2
paramid = 0xFFF89118
isfloat = 1
paramname = Throttle_Plate_Open_Angle
paramid = 0xFFF89030
isfloat = 1
paramname = RPM
paramid = 0xFFF893F8
isfloat = 1
paramname = Engine_Load
paramid = 0xFFF8914C
isfloat = 1
paramname = Ignition_Advance
paramid = 0xFFF8DB88
isfloat = 1
paramname = Defogger
paramid = 0xFFF8939F
databits = 8
;offsetbits = 0
; is KC Learn???
paramname = KC_Advance
paramid = 0xFFF8B0C0
isfloat = 1
paramname = Intake_VVT_Adv_Left
paramid = 0xFFF8C0EC
isfloat = 1
scalingrpn = x,50,-
paramname = Exht_VVT_Adv_Left
paramid = 0xFFF8C134
isfloat = 1
scalingrpn = x,50,-
paramname = FBKC
paramid = 0xFFF8B0C4
isfloat = 1
paramname = IAM
paramid = 0xFFF816F0
isfloat = 1
paramname = Coolant_Temp (Wrong address all 0's)
paramid = 0xFFF8DB70
isfloat = 1
paramname = AFR
paramid = 0xFFF89330
isfloat = 1
scalingrpn = x,14.7,*
paramname = Speed_Ram
paramid = 0xFFF893D0
isfloat = 1
scalingrpn = x,0.621371,*
paramname = Ignition_Total_Timing
paramid = 0xFFF8AE0C
isfloat = 1
paramname = KC_Advance_IAM
paramid = 0xFFF8B134
isfloat = 1
; same as IAT
;paramname = IAT_Ram
;paramid = 0xFFF87C64
;isfloat = 1
paramname = IAT
paramid = 0xFFF8DB8C
isfloat = 1
paramname = Throttle Position
paramid = 0xFFF8DB94
isfloat = 1
paramname = FLKC
paramid = 0xFFF8B160
isfloat = 1
paramname = Fuel_Injector1_Latency
paramid = 0xFFF8A05c
databits = 8
paramname = Port_Direct_Ratio
paramid = 0xFFF8A0F4
isfloat = 1
;1=OL, not up to temp, 2=CL, 4=OL or decceleration fuel cut, 8=OL due to system ;failure
paramname = Fuel_System_Status
paramid = 0xFFF8DC0E
databits = 8
conditionrpn = Defogger,1,==
action = start
conditionrpn = Defogger,0,==
action = stop
Please feel free to let me know if you can find any other params that are loggable. I have a few missing from here.
