Quote:
Originally Posted by gabeg86
is there a way to change virtual dyno to read below 90% throttle? my throttle tapers off to 89% by redline and thus won't show top end numbers...
edit: just changed the throttle values in my logs to above 90%. problem solved
|
This has already been covered in the thread, but it's not an issue below 90%... the app assumes if the TP drops more than ~5% from the peak value it's no longer at WOT. I've messaged the guy that wrote it about this, but the easy solution is to just increase the TP values to be within 5% of the peak (I normally just set them all to 100).