Quote:
Originally Posted by King Tut
I've *witnessed* a hell of a lot more than a "small little bit" come out of the tail section when installing a clutch. I would drain it or buy the Subaru plug the next time. With that being said, you don't need to pull it to do the shifter it sounds like.
|
Be more careful next time.
Quote:
Originally Posted by Xerious
Thanks! Anyone willing to write up a DIY?
Sent from my SAMSUNG-SM-N900A using Tapatalk
|
Check the Kartboy DIY...it's informative and the kit you bought comes with instructions that are readily adaptable to the Kartboy DIY. There's almost nothing to this install compared to replacing the lever on an actual shifter kit.