Quote:
Originally Posted by xxscaxx
Yep, you got it. Since that pipe was on backorder I decided to do it with the tee.
The only thing is, you have to drain out the coolant (or make a giant mess like me trying to not drain it lol), and you have to be pretty spot on with your cut in the stock hose. Theres just enough room to add the tee on the one side, so if you cut it too far to the left or right, you will either be too much in the bend of the hose, or too close to the stock hard line and will need a new small piece of hose for that side.
|
Yeah I'm fully prepared of the coolant flood that's about to ensue after reading every single page of this thread.
Do you have a zoomed out pic of the whole area where I need to install the tee? And where is best to install it so it's not in the bend or stock hard line. That's the only thing I seem to be confused about without having fully lifted the car to see what's going on.