I've been trying to tune my car for quite some time now. Dealt with various issues but not I have come across one that has me stumped.
I'm tuning for a turbo. When I do a run, I see that I'm running quite lean. I command 12 AFR but get back around 15-16. Not good. So I try to find why... All the maps seems to be setup correctly. I check the logs and see that my Engine Load Limit is capped at 1.33.
This does not make sense at all. I have changed the Engine Load Limit tables to 4. I thought that 4 may be too high so I reduced it to 2. In each instance, the logs show that the max load was 1.33. I have rescaled all relevant tables to go up to an engine load of 2.0.
The only thing I can think of, is that it's not flashing the ECU properly. But I get no error. And I definitely know that it is at least partially flashing because I have disabled some fault codes successfully.
Any suggestions would be greatly appreciated.
