Quote:
Originally Posted by jdv14476
Update, don't remember which post it was, but I read that VD only reads above 90 percent something throttle position. Once I stripped my data file down to that parameter, I ended up with a 160 whp / 150 ftlbs. Where as I understand that this about correct. I'm still skeptical. These finds are still from original data logs which I have not yet had an opportunity to try any of the suggested pulls from earlier posts. Still learning and trying to catch up.
|
150ft lbs is kinda high for stock car. What I've been doing is warm up the tires before logging and make several back to back pulls. Once I have that I upload it to Virtual dyno then I filter out all the pulls with any type of spiking in the the graphs. My results have been pretty consistent.
Here's one for bones stock vs, OFT stg1 tune on a bone stock car.
