|
I also used the WolfSongX method, but on a weight-loss plan. I had some Dynamat Xtreme around from a previous job, so I used one square foot per door, cut into smaller pieces. I used lightweight Polyken flashing tape (butyl/aluminum) to tape all the holes along with the corrugated plastic board from Lowes. No rattles, bass output has doubled/tripled and the door sounds SOLID. Even with that little material/weight, the results were astounding to me.
I couldn't justify all the weight of doing full coverage, but 2 lbs per door was an acceptable compromise.
I should have them back apart this weekend to replace the door speakers, so I'll take some pictures.
|