Quote:
Originally Posted by vgi
almost forgot to post  |
Bingo...
I'm seeing a lot more correlation now between the LTFT and these stored values. In fact, there's only one value that I'm not seeing (-5.49806, which kicks in above 20 g/s - i.e. D range of Table A) which may be in another ram address - but on the most part you can see how it's using values either from the ranges in B or in A, depending on the MAF g/s.
I suspect that if I manage to dig out the fueling mode, it will demonstrate how it's switching across the two tables.
So that being said, it's not as useful as in the older roms - I was hoping to provide a way to see a 'learning view' in the absence of having that tool for the BRZs - but if the tables are different, it switches between the tables constantly.