Quote:
Originally Posted by Boofneenee
hmm found this just now
Q: When should I be concerned about detonation/knock? What are some things to try or items to
check?
A: This is probably the most difficult question to answer but in general, we consider corrections of ~-2.5
degrees to be “normal” and not of major concern. If DAM is persistently below 1 or 16 and/or corrections 4 | P a g e
greater than -2.5 degrees are repeatedly observed to the “Feedback Knock Correction” or “Fine Knock
Learning” monitors, this is good reason for further inspection.
|
-2.5!?! I dislike anything over -1.