Quote:
Originally Posted by toyotaAlex
hey there guys, been having this problem now since i have been trying to flash my car.
[19:10:13.194] using metadata XML ID read_subarush72531brz from file C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata/read templates/read_subarush72531brz.xml
[19:10:13.206] J2534 API Version: 04.04
[19:10:13.206] J2534 DLL Version: 1.01.4035 Dec 16 2013 23:12:40
[19:10:13.206] Device Firmware Version: 1.14.4010
[19:10:13.206] Device Serial Number: TAwsLqbV
[19:10:30.872] reading vehicle info...
[19:10:30.880] CALID : ZA1JB01D
[19:10:30.881] CVN : 38119841
[19:10:30.888] VIN :
[19:10:30.888] starting programming session...
[19:10:30.889] turning off DTCs...
[19:10:31.219] turning off unnecessary communications...
[19:10:31.320] unlocking ECU...
[19:10:31.320] Requesting Seed...
[19:10:31.320] interface close
[19:10:31.331] interface close
any ideas?? i have tried both usb ports, and i frequently restart my computer
|
As above
Assuming all bitbases def files are correct
Connect tactrix to car the connection can be suspect on some cars put a rubber band arround tactrix and hook it around bracket at rear of obd port to put some backwards pressure on tactrix as opposed to upwards pressure into the socket.
Turn on ignition
Turn OFF all accessories radio fans ect
Select read or write in ECUFLASH
Dialog box will appear
WAIT at least 15 seconds even if you don't hear beeps
Then click ok to start write/read
good luck !