Quote:
Originally Posted by reardrv
Ok so I had previously flashed my car successfully with the OFT stage 1 ROM. This morning I installed the OFT headers and went to flash their stage 2 ROM, but everytime I try to read or write this happens:
[16:36:31.871] using metadata XML ID read_subarush72531brz from file C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata/read templates/read_subarush72531brz.xml
[16:36:31.885] J2534 API Version: 04.04
[16:36:31.885] J2534 DLL Version: 1.01.4035 Dec 16 2013 23:12:40
[16:36:31.885] Device Firmware Version: 1.14.4010
[16:36:31.885] Device Serial Number: TAn8SKIw
[16:36:37.608] reading vehicle info...
[16:36:37.617] CALID : ZA1JA01C
[16:36:37.619] CVN : 8349A8FB
[16:36:37.624] VIN : JF1ZCAB17D1611837
[16:36:37.624] starting programming session...
[16:36:37.626] turning off DTCs...
[16:36:37.964] turning off unnecessary communications...
[16:36:38.066] unlocking ECU...
[16:36:38.066] Requesting Seed...
[16:36:38.069] interface close
[16:36:38.081] interface close
Anybody have any ideas?
|
Check you connection to obd port use the rubber band trick or use an obd extension. Check if the tactrix will log data that will check connection. I got similar issues when I had bad connections
Just updated 32bitbase file link in original post see Td-d post above.