Quote:
Originally Posted by Chimera
Thank you Paul,
The sort of information I'm looking for and referring to as missing from the website are things like expected current load/component, power consumption, perhaps even are these common anode or cathode? (not sure that last one really matters, just stream of thought now)
|
Sure- we do not sell everything as individual components, necessarily. We design kits to be installed as recommended, so there is no need for technical specs for every component in the descriptions at this time.
All RGB components we offer are common anode.
One Prism DRL bulb draws about 400 mA maximum @ 13.2V, on white.
The current load for RGB angel eyes depends entirely on the size of the ring, they are driven at constant current depending on the ring size. The 80mm uses about 500mA max @ 13.2V.
For the control box, I assume you are referring to the RF controller, and standby, you mean off, but still plugged in? Around 8 mA at 13.2V. (Yes, no unit error there, just .008 amps)
Quote:
|
Your company offers a few products utilizing SMD 5050 LEDs but no guidelines or information concerning how to use them in conjunction with one another.
|
Everything can be plugged into each other- no additional information is required to use products in conjunction with one another. Everything needs a constant 12V source. That's it!
Let me know if you'd like any more info!
Thanks,
Paul