Quote:
Originally Posted by Fonzie517
The 10 Series lights are a breeze to install compared to the Euro/JDM lights. You just repin the six wires from the 10 Series headlight into your factory plug(taken from your stock headlights) and that mates with the body control side. Don't worry about the 7th wire mentioned, but do remove the large resistor as instructed. You shouldn't need anything other than what comes in the box with the headlights from Toyota and what came installed on your car from the factory.
|
If you only pin the 6 wires without pinning the live 12v wire from where the resistor normally plugs into, how are you getting DRL functionality? I could only see the LED's turning on with Parking Lights, Low beams, and High beams since those are the Live wires and Ground Wires for the 6 pins.