|
I have the ACT streetlite clutch and flywheel.
The OEM clutch never felt very good to me, and the ACT feels the same, just with some extra pedal force required.
One thing I thought about though was, IF, the ACT PP dimensions were off from OEM, then the actuating rod would need adjusting possibly. This is something that shops might not do. They probably simply install the clutch, it works, send it out (that's what my shop did).
My ACT clutch starts grabbing JUUUUST off the floor. I can also feel quite a bit of pedal travel before I can feel the clutch. I plan to lengthen the adjusting rod so the clutch grabs a little farther off the floor. This will result in the PP opening up a bit more, which might fix the issue of these clutches not totally disengaging.
|