Quote:
Originally Posted by regal
I hope there is room for a few remedial questions but after 2 years I am very close to updated to the latest factory calib. My back up car is alost back together so in case something goes wrong no worries. My e-tuning stopped with hondata a decade ago.
What I have:
1. Tatrix cable cable.
2. ecuflash_brz_beta_1444040b.exe
3. Td-d's def file ZA1IB01C.xlm (don't think I need this as my goal is just to upgrade factory calib.)
4. 2013ZA1JB01C.bin
5. 2013ZA1JB01C.hex
6. Aspire One Laptop dual boots Win XP/Win 7x64 (USB 2.0)
I imagine I want to install all this on the WinXP partition? And do I need both the hex and bin file on the laptop? Any drivers I need (this is SP3?)
Thanks for the time/thread.
|
Any rom you want to write you will need a definition. You can read without one.
Did a write up on this forum in another thread TACTRIX INFO FOR ECUFLASH..... see first post. else wise you look good to go.