Quote:
Originally Posted by Khyron686
Did you use the 17mm or 14mm socket on the bottom (I'm going shopping before I start this little project). Then I assume you bought whatever crows foot that fit the socket.
|
I used whatever sockets fit the front strut top nut and rear strut top nut. The socket on the bottom is attached to a 3/8" drive extension so any socket (14mm or 17mm) w/ 3/8" drive will fit. I had a set of crow feet and the 19mm crow foot happened to fit the top of the extension so I used it. All these tools were available at Harbor Freight.