Quote:
Originally Posted by cnk
It's a process of elimination. You can disconnect the sway bar end links and see if the noise goes away as sometimes the noise comes from there. But if you had no noise before and now you do and the only thing you changed were the LCAs, then that's most likely the culprit.
|
I did both the V3 coils and LCA's at the same time. Any tighter on the top hats may risk damaging something. I had a small 1/4" socket over the valve with a open socket on the nut on top. Won't go any tighter.
Next thing I'll look at is the lowering collar to make sure it's tight and all endlink connections.