Quote:
Originally Posted by FullTuneZN6
lots of pages ive been going through and this is the setup im considering "if it works", i need pics and feed back to figure out.
-default setup is 530s 18x8.75 +33/35 square with 235/40/18...will have full coilovers, but thats another decision for another thread lol
-now if poke is minimal front and rear and no rubbing or fender mods required, i was contemplating the same setup but with staggered offset +35 front and +20 rear, my thinking is that this will give a staggered appearence w/o actually being staggered, also idk if the concavity will be affected by the change in offset on the rear wheel as well, your help is appreciated thank you
this is where pics and feedback come in please help thanks in advance
|
Offset will NOT affect concave appearance of wheels. 8.75 +33 or +20 will have the same concave look. Only difference is with +20 the entire wheel will be pushed out.
If you want square setup then 18x8.75 +33 all around looks good, as long as you don't mind a few millimeters of poke in the front. I don't like poke, so I went with 18x7.5 +38 front and it looks perfectly flush to me. I'm also using the same 4 tires on all wheels. It doesn't look bad at all. If you want a staggered look then that is what I recommend.