Quote:
Originally Posted by wdninja
That's not necessarily the case and I wouldn't be telling people that. You have to be very careful how much you torque the nuts, because if you go too far you'll crack the housings.
It's listed a few times in this thread, but the torque specs are:
3.25 ftlbs / 39 inlbs / 4.4 Nm
You might get away with a little tighter than that, but I wouldn't push the limit.
|
the nuts and bolts are made of steel also you have tail light gasket. so that make safe from losing bolts tiered or brake the tail. i not say torque it until the tail broken .