Quote:
Originally Posted by Imrac
I am really surprised at Nameless so far. I think I need to call them. They were very quick to respond at first when I reached out to them. I passed a long the photos of how close the pipe was to the cylinder head (Close enough a feeler gauge was barely able to get in between). The ask a couple questions regarding my exhaust setup as I also have an after market header. I told them I didn't test fit with my OE manifold, but they still gave me a return label.
At that point the pipe was still on my car (Left it on for a couple of days). I took it back to Ishii Motors (Which, btw were very kind to me and didn't pull any punches) to have it taken back off, but I also had them test fit the OE.
There was a little bit more clearance with the OE manifold, about 1/16th of an inch. I had them take more photos which I sent back to nameless clarifying with them if they believed this was an acceptable distance with the OE manifold. I didn't want to send out the pipe and have them come back saying it was fine and me paying the shipping back.
But I haven't heard back from them since. I followed up with a couple more emails, but nothing. I realize they are a small shop, and probably don't check their email often. I have been lazy/busy/forgetful to give them a ring.
I believe they are a reputable brand, I have heard nothing but good things for them, and I believe they will take care of me. Just a little frustrating is all.
BTW, this is with the universal one.
|
Call them. Sometimes they are slow with email since they are so busy. I have one of the original op/dp. It is specific to manual trans cars (not the factory fit model). If you have the auto trans car you'll need the factory fit model, unless they've changed stuff since I last looked at their website and the pipe.