Quote:
Originally Posted by melon
GREAT JOB!!! Could you post how you did the wiring?
|
I ended up having to figure out the wiring myself but thanks to raytrix's video I had to do this to my friends car. I used the OPs instructions for reference.
V on with headlights
LED triangle lights up when brake is depressed with flashing
Reverse- no changes
Instructions:
1. Remove 10 phillips screws from the back of the light.
2. You will see a dark blue wire connecting the V to the LED triangle
3. Remove the Blue and Red wire from where it is connected to the Triangle by either cutting or desoldering it.
4. Solder the Blue and Red wires together. Then cover exposed wire with electrical tape or heatshrink tubing.
5. Now solder a new wire from the Triangle to the Orange/Black Wire.
6. Check your work. Make sure there are no loose connections and test it out.
7. Reassemble fully and have a beer. You earned it.
