Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Honda S2000: CeramicPro 9H

goat_cheese · 04-07-2014, 04:52 PM

I had a few board members interested in my work. This is posted in a few forums too.

Arrival

On to the wash

High pressure RO rinse off. Long day ahead!

Heavy enzyme wash to break down grease, oils, and built up spray waxes. The car is rinsed and resoaked multiple times after a quick wash.

Cleaning up the wheels while the soap dwells on the paint.

Foam cannon loaded with Chemical Guys citrus wash for spot cleaning with a ultrafine synthetic brush.

A very generous RO rinse and we keep it wet until we move it inside. Water doesnt bead very well anymore, the slight beading is from how well the paint was leveled at the body shop.

Whole car is clay bared with a ultra fine grade polymer claybar. Zero scratching.

Taping up for compounding

Dont mind TSM in the back!

Ready to get messy.

Headlights needed some work as well. No problem

You can see the correction in detail on Flickr. Here are the results.

Ready for coating. This is bare clear coat.

Coating going down.

Immediate results.

Carbon fiber coated as well.

Thanks for checking it out.

Here are a few other cars with some other coating products.

04-07-2014, 04:52 PM	#1
goat_cheese Join Date: Oct 2012 Drives: R33 Location: Medical Center Posts: 31 Thanks: 0 Thanked 11 Times in 9 Posts Mentioned: 0 Post(s)	Honda S2000: CeramicPro 9H - Permanent Coating I had a few board members interested in my work. This is posted in a few forums too. Arrival On to the wash High pressure RO rinse off. Long day ahead! Heavy enzyme wash to break down grease, oils, and built up spray waxes. The car is rinsed and resoaked multiple times after a quick wash. Cleaning up the wheels while the soap dwells on the paint. Foam cannon loaded with Chemical Guys citrus wash for spot cleaning with a ultrafine synthetic brush. A very generous RO rinse and we keep it wet until we move it inside. Water doesnt bead very well anymore, the slight beading is from how well the paint was leveled at the body shop. Whole car is clay bared with a ultra fine grade polymer claybar. Zero scratching. Taping up for compounding Dont mind TSM in the back! Ready to get messy. Headlights needed some work as well. No problem You can see the correction in detail on Flickr. Here are the results. Ready for coating. This is bare clear coat. Coating going down. Immediate results. Carbon fiber coated as well. Thanks for checking it out. Here are a few other cars with some other coating products.