Quote:
Originally Posted by vgi
@ AdrianG @ steve99 @ Td-d @ all
ok guys, it's warmer and i finally got few hours today to spend on my logcfg.txt and check my thoughts.
i think that the onboard logging code seems to be buggy or has some kind of limitations.
1. i got the defog switch to work by defining all params in ascending sorting by mem addresses.
2. i have 73 params defined, if i enable all of them the logger just chokes with logcfg.out empty and no csv file. Either there is a limit on number parameters or theres is limit on length of parameter name. or something else.
here's my cfg file: https://drive.google.com/file/d/0B4i...it?usp=sharing |
That good to here , I still have not got defogger working will try the ascending order trick.
also noticed when I added extra parameters for defogger it seemed to upset my RPM trigger, even if I had defogger stuff commented out , it still triggers but seems to trigger at about 1000 rpm instead of zero so got heaps of log files every time i went to idle. Running with no triggers it fine will have to look at it some more when I get time.
Thanks for update.