|
ok i got tired of reading so not sure if this has been said already , but yeah i have heard of camber bolts for the rear that go in the subframe hole of the LCA. If you use some thin camber bolts installed properly im pretty sure you can get -2. If not try this method
[ame="http://www.youtube.com/watch?v=cU5lJtJ3lNA"]slotting bc coils on Protege5 - YouTube[/ame]
a combination of maxed out camber plates + camber bolts + the slotting method done above im around -11 degrees of camber up front. Mcpherson strut type suspensions are pretty easy to get a good amount of camber for cheap , Good luck
__________________
Instagramz: VicMoralLess
|