Quote:
Originally Posted by King Tut
The two popular ones are to tee off of the OEM low oil pressure sensor on the front driver side of the engine or get a fitting to replace the large plug on top of the engine below where the intake enters the throttle body:
http://www.rallysportdirect.com/Suba...il-Galley-Plug
With oil temp gauges you really have to be careful that you are reading the temp of the oil and not the temp of the fitting or metal. I normally like seeing those in the oil pan. |
Thanks for the info! I already have that oem Subaru oil gallery plug hooked up to my oil pressure gauge. I'm having a hard time looking for a decent fitting to tee off the stock oil pressure sensor. I've only seen brass ones which are said to be weak. I know I could use an oil filter sandwich plate, but I'm already running one for my oil cooler and I don't want to stack another one