Quote:
Originally Posted by blugbox
How did you guys manage to pry that damn spring off?! I tried every angle and method I could think of and never even got close. I'd rip the entire pedal off the firewall before that spring would pop off... I gave up halfway through the job.
Any specific tips with pictures or more detailed instructions? Thanks for any help guys!!
|
Remove the pin where the clutch pedal arm connects to the clutch master cylinder, what you typically turn to raise and lower the clutch pedal. Once disconnected, pressed the clutch to the floor, this should release tension of the helper spring. You need to push out the pin holding the spring in, then take a flat head and push really really hard where that pin goes through. It will eventually pop-off.
.ck
Sent from my HTC One using Tapatalk