Quote:
Originally Posted by CSG Mike
They shouldn't be making noise when you're just rolling, unless you didn't do any cooldown after bedding and you left some deposits (melted some pad, and it solidified on the rotor). Deposits will go away over time.
|
Took off the rotors and had them turned to just take off the top layer. Cleaned up everything possible in the brakes. Took a little garnet paper to the pads to make sure they were clean.
Re-bedded the rotors/pads and the squeel is back. Keep in mind i didn't use the shims or any grease. Time to put the Bobcat's on and save the XP10's for the track.