Quote:
Originally Posted by Td-d
What I posted, as Steve99 pointed out, is the definition file (XML) for Romraider. Here's the definition file for Ecuflash, which would be required to flash the rom onto the ecu if you're using a Tactrix OP2: https://raw.github.com/TD-D/SubaruDe...Z/ZA1JB01C.xml
You need to differentiate between the binary (the hex file) and the definition file required to edit the rom, and flash it onto the ecu.
I have the B01C rom - if FRS-AZ can confirm it's stock, then I can send you a link. As I said in the other thread, if all you're looking to do is have the ability to flash the latest rom on, then Ecuflash and an OP2 will be the cheapest - will set you back $169. |
Man you are great just ordered a tatrix cable and plan on standing up my appointment with the dealer. Thanks a ton. I hope you stick with this forum, there are some uneducated morons but smart smart ones too.
And hopefully by the time I get some VA I can use the same cable/software to tune a header/uppipe.