Just got a chance to take off the left-front wheel to inspect the pads/rotor since that one was squeeling constantly. Here's what it looks like:
Looking at the last picture of the pads you can definitely see that the pad closest to the camera has a dark line through the lower 1/3rd of the pad that is shiny. I'm assuming that's glazed.
As far as the rotors go i can't tell to be honest if they're glazed or not. Debating if i should get some garnet paper and try hitting the pads a bit or what i should do at this point. Only one HPDE on the pads/rotors and everything was bedded properly - the brakes felt awesome at the track. Now, definitely less bite and very loud.