Quote:
Originally Posted by Wepeel
Did you notice if you were able to run the front bar on the full stiff setting? I have the 20mm version (which is probably dimensionally the same but thinner), and if I try to put it on the stiffest setting the blade extends too far and will hit the control arm. I think this is because my coilover struts (like the MCS) have the sway bracket closer to the knuckle mount.
|
Sorry, I haven't tried full stiff.
Quote:
Originally Posted by toeout
Hey Max, sorry to use your thread for troubleshooting, but since you have nearly the same setup, I thought I'd ask.
Do you have any rattle/light knocking in the rear, when going over holes/bumps on the road?
I disconnected the swaybar, so I know that's not it. And the noise went away when I put the stock shock/spring combo back on, so it's not the SPC lower arms.
This leaves only the MCS shocks with springs and stock mount. Spring is preloaded, the mount is on nice and tight, so I'm sorta grasping at the straws here.
|
I have a knocking in the front, which I have assumed is the front endlinks, but I haven't taken a good look yet. I've been moving house the last week and things have been a bit crazy.