Quote:
Originally Posted by ATL BRZ
Is there a DIY for this? Were you able to replace the #1 coil without jacking up the engine?
P0351 last night in a WOT 2nd-3rd gear data logging pull. Cleared and could not replicate. Was idling in a parking lot for 10 minutes immediately before the pull. It's possible the coil is over heating and failing over time.
The #1 coil right above the header/OP junction. It gets pretty hot down there.
Subaru parts dept at my local dealer just gave me a part #22433AA651 for the coils
|
All of the coils can be replaced from the top by just moving the ECU.
Be careful not to drop the bolts down onto the under tray.
I did this once and it was a bitch to get out.
Stuff towels down below the heads so if you do drop one it can be easily retrieved.